 | Collared Eyebolts - BSW Thread Collared eyebolts can be used vertically and for angled lifts (i.e. using a two leg sling). We recommend that the sling angle should not exceed 45º from the vertical.Capacities range from 0.10 to 12 tonnes.To BS 4278 Table 1 - 1984Tested and Certified.Long shank also available.Also available with UNC, UNF and BSF threads - prices upon request.
|
|
 | Collared Eyebolts - Metric Thread Collared eyebolts can be used vertically and for angled lifts (i.e. using a two leg sling). We recommend that the sling angle should not exceed 45º from the vertical.Capacities range from 0.10 to 20 tonnes.To BS 4278 Table 4 - 1984Tested and Certified.Long shank also available.
|
|
 | Dynamo Eyebolts - BSW Thread Dynamo eyebolts can ONLY be used vertically, if used in pairs a spreader frame is required. Capacities range from 0.10 to 3.5 tonnes.Tested and Certified.Long shank also available.Also available with UNC, UNF and BSF threads - prices upon request.
|
|
 | Dynamo Eyebolts - Metric Thread Dynamo eyebolts can ONLY be used vertically, if used in pairs a spreader frame is required. Capacities range from 0.10 to 3.2 tonnes.To BS 4278 Table 3 - 1984Tested and Certified.Long shank also available.
|
|
 | Collared Eyebolts to DIN 580 DIN eyebolts supplied with a metric coarse thread and can be used vertically and for angled lifts (i.e. using a two leg sling). We recommend that the sling angle should not exceed 45º from the vertical.Capacities range from 0.140 to 16 tonnes.Tested and Certified.
|
|
|
|
 | Starpoint Eyebolts - UNC Thread The Starpoint eyebolt is ideal for multiple leg applications where the eyebolt must be adjusted to the direction of pull. The Starpoint eyebolt is tightened in position whilst retaining the ability to rotate to the direction of pull.Capacities range from 0.4 to 12 tonnes.Tested and Certified.
|
|
 | Starpoint Eyebolts - Metric Thread The Starpoint eyebolt is ideal for multiple leg applications where the eyebolt must be adjusted to the direction of pull. The Starpoint eyebolt is tightened in position whilst retaining the ability to rotate to the direction of pull.Capacities range from 0.4 to 12 tonnes.Tested and Certified.
|
|
 | Rotating Lifting Points Rotating Lifting Points are ideal for single and multiple leg applications where the lifting point must be adjusted to the direction of pull (rotating loads through 90 degrees). The Rotating Lifting Point is tightened in position whilst retaining the ability to rotate AND pivot to the direction of pull.Metric and UNC threads available.Capacities range from 0.3 to 45 tonnes.Tested and Certified.
|
|