|Access Platforms |
Supplied for one or two man use.Anti-trap hand rail and high back guardPositive fixing to truck forksNo tool loss off platform due to deep kick railSide rails have high impact resistanceNon slip floor with drain holesSelf-closing gate that locks automatically on raising platformIntegral safety harness railConforms to PM28 2nd Edition.
|Drum Handling Equipment|
We offer a wide range of drum clamps, grips, tongs, rotators and manipulators to suit steel and plastic drums.
A range of fork heel and load protectors. The fork heel protectors are made from special cast steel and are supplied as a pair that bolt directly to the heel section of each fork. Once the protector becomes worn you simply reverse them and use the other side.
The Fork Fender is designed to help reduce the risk of fork truck accidents by highlighting the fork tips during normal use and when the forks are raised during servicing.
|Fork Tine Hook|
Used to safely secure hoisting equipment to forklift tines. The tine hook is pushed on to the fork tine and is fastened with two spindles. The pivoting as well as swivelling hook with safety latch ensures safety while lifting.
|Fork Mounted Hook|
The fork mounted hook is the most cost effective way of safely hanging a load under the forks of your lift truck. Simply clamps onto the forks, anywhere along their length.
|Gas Bottle Handler|
A gas bottle handler that is designed to safely allow gas cylinders to be transported using a forklift truck.
|Sweeper Fork Attachments|
The fork mounted sweeper is a quick and easy solution for reheaping your granule products such as sand, top soil, grain or similar. Optional left or right hand sweep.Supplied with interchangeable nylon brushes.
Roll forward tipping skips strategically positioned in the factory, warehouse, yard or construction site, act as a localised containment point, reducing the cost of handling waste or scrap and increasing the levels of safety throughout the workplace.Different colours available.